Front suspension and steering

The new high wishbone layout adopted on the front suspension is the ideal solution to guarantee precise control of wheel movement, with a clearly defined steering axis. The architecture was borrowed from racing and endows the car with outstanding dynamic performance, and extremely sensitive, pinpoint steering. The high double wishbone was already used on the 159 and has been further improved on the new Alfa Brera. First of all, the steering axis was brought closer to the centre of the wheel, increasing the Ackerman level (to increase parallel wheel movement when steering) for better response when cornering, thanks to the steering which is the most direct in its category. The steering of the new Alfa Brera has an excellent ratio (12.7 deg. steer for every degree of wheel steer) for an overall rotation of 2 1/4 turns of the steering wheel, which translates into a more direct response for the driver, more responsive steering and better stability control.


What is more, painstaking analysis of the matching of the steering geometry and the wheelarch volume, made it possible to achieve high steering angles even with the largest tyres, and this significantly improved the turning circle between kerbs (10.7 metres).

Great attention was paid to the new wheel upright where it connects to the levers, exploiting the available space inside the rims in full, and this has significant advantages in terms of lateral rigidity; the size of the coaxial damper spring unit with dual tube shock absorber has been increased to improve its capacity to absorb road roughness; the aluminium lower wishbone combines excellent structural characteristics and a much lower weight; the upper aluminium arm fits a pair of dry friction sliding bushes, a solution chosen because it is stronger and more reliable, and guarantees a more progressive action. And finally, the suspension is connected to the chassis by a closed geometry frame which is stiffer than the previous solution which had a simple crossbeam.


Rear suspension

The new Multilink rear suspension allows wheel movement to be controlled in a sophisticated manner, achieving the best possible balance in terms of performance. The system with three levers and a transverse blade highlights the performance of the various components subject to longitudinal load, to improve the filtering of roughness and, under a lateral load, achieving faster responses, enhanced stability and extreme grip.

The rear suspension of the Alfa Brera now features:

• A higher anchorage point for the longitudinal link, which is now positioned higher than the centre of the wheel, allowing the suspension to perform a longer, more flexible stroke, with an optimal response when negotiating an obstacle.
• The aluminium upright, fitted with a third generation, extremely rigid hub, supports the connection bushes for the camber lever and the longitudinal link.
  The bi-tube spring-damper unit is larger than other conventional solutions, this achieves a better compromise between handling and comfort.
• The camber link, which allows the static camber to be adjusted and produces a geometry capable of guaranteeing a good camber recovery with wheel shake to ensure that the wheel rests perfectly on the road and wear is thus uniform, even when the car is pushed to the limit.
• The rear hydraulic bush guarantees excellent filtering of roughness, and allows the wheel to retract slightly when negotiating an obstacle.
• A high tensile steel crossbeam isolated from the bodyshell by four elastic bushes that dampen high frequency vibration.

The Alfa Romeo Q4 4-wheel drive system

The new Alfa Brera with the powerful 3.2 JTS offers the same 4x4 system with three differentials already adopted on the Alfa 159 Q4. This takes the form of the ultra-new Twin Diff system that represents the latest development of the Torsen C.


previous page | go to Page8